Loading ...
Loading ...
Loading ...
pair.
The subwoofer and Soundbar will automatically
remote control to switch the unit to On mode.
Do not press Pair on the rear of the
subwoofer, except for manual pairing.
Manual Pairing
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
mains sockets and then press on the unit or
Plug the Soundbar and the subwoofer into the
• Before connecting the AC power cord,
Connect to Power
connections.
underside of the unit.
• Connect the mains cable to the AC~
voltage printed on the back or the
• Power cord quantity and plug type vary by
socket.
power supply voltage corresponds to the
regions.
• Connect the mains cable to the AC~Socket
of the subwoofer and then into a mains
Socket of the unit and then into a mains
ensure you have completed all other
socket.
• Risk of product damage! Ensure that the
HDMI OUT
(ARC)
USB OPTICAL IN
AUX IN
AC IN
AU X
still keeps blinking, repeat step 1.
in an open area (the closer the better).
• Remove any objects between the subwoofer and the
conflict or strong interference (e. g. interference from
Soundbar.
3. If manual pairing failed and the Pair indicator
• The subwoofer should be within 6 m of the Soundbar
• If the wireless connection fails again, check if there is a
procedures.
conflicts or strong interferences and repeat the above
an electronic device) around the location.Remove these
1. Press and hold the & (Source & Vol-)on
The AUX/USB indicator on the Soundbar
slowly. The subwoofer will be paired
2. The AUX/USB Indicator goes off,the pairing
when successful.
and hold Pair on the subwoofer.
the Soundbar simultaneously, and then press
and the Pair indicator on subwoofer will blink
successfully in about 2 seconds.
LED indicator of subwoofer grows constant
Tips
Tips
Pair up with the subwoofer
Automatic Pairing
Loading ...
Loading ...
Loading ...