Loading ...
Loading ...
Loading ...
5. Slide end cap onto the end of the handle assembly.
Item Description Qty.
1 Handle Assembly 1
2 End Cap 1
6. Ensure set screws are facing the bottom of the machine. Tighten set screws in the end cap using a 4mm Allen wrench.
Item Description Qty.
1 End Cap 1
2 Set Screw 2
Tighten hardware to 8-10 (11-14 Nm).
7. Repeat Steps 2-6 to install the right handle assembly.
Install Seat and Back Pads
1. Install screws and washers securing the seat pad to the main frame using an 8mm Allen wrench.
Item Description Qty.
1 Seat Pad 1
2 Washer, Flat 3/8" 4
3 Screw, M10 x 1.5, 30mm 4
Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).
Page 25 of 38
Loading ...
Loading ...
Loading ...