Loading ...
Loading ...
Loading ...
Safety features
42
Overheat protection
All the induction coils and the cooling
eleme
nts for the electronics are equip‐
ped with an overheating protection
mechanism. To prevent the induction
coils and cooling elements from over‐
heating, the overheating protection
mechanism works on the affected
cooking zone or on the entire cooktop
in the following ways:
Inductive coils
– Any booster function in operation will
be turned off.
– The power level that is set will be re‐
duced.
– The cooking zone turns off automati‐
cal
ly. flashes in the timer display
alternatingly with .
You can use the cooking zones again
as usual when the fault message has
gone out.
Cooling elements
– Any booster function in operation will
be turned off.
– The power level that is set will be re‐
duced.
– The cooking zones turn off automati‐
cal
ly.
The affected cooking zones can only be
used again if the cooling element has
coo
led down to a safe level.
Overheating can be caused by:
– Heating empty cookware
– Fats or oils being heated at high
power settings
– Underside of cooktop insufficiently
venti
lated
– A hot cooking zone being turned on
aft
er a power outage
If, despite elimination of the cause, the
overhe
at protection is triggered again,
contact Miele Service.
Loading ...
Loading ...
Loading ...