Loading ...
Loading ...
Loading ...
- 36 -
English
You can adjust the HPF or LPF cutoff frequency and the slope for each speaker.
The following speakers can be adjusted:
Front, Rear, Subwoofer.
[Speaker Level]
[Front Left] [Front Right]
[Rear Left] [Rear Right]
[Subwoofer] [Listening
Position]
Adjust the speaker output level of the listening position.
1 Touch or to select the listening position then
select the output speaker.
2 Touch or to adjust the selected speaker output
level.
NOTE
For rear speaker, this function is available only when [Rear] is
selected in [Rear Speaker Output].
[Crossover] Select a speaker unit (filter) to adjust the HPF or LPF cutoff
frequency and the slope for each speaker unit (page 36).
[Subwoofer Settings] Select the subwoofer phase, LPF cut-off frequency and the
slope (page 36).
[Listening Position]
[Off] [Front-L] [Front-R]
[Front] [All]
Select a listening position that you want to make as the
center of sound effects.
[Time Alignment]
[Front Left] [Front Right]
[Rear Left] [Rear Right]
[Subwoofer] [Listening
Position]
Select or customize the time alignment settings to reflect
the distance between the listener’s position and each
speaker. You need to measure the distance between the
head of the listener and each speaker unit.
1 Touch or to select the listening position then
select the alignment speaker.
2 Touch or to input the distance between the
selected speaker and listening position.
NOTE
This function is available only when the listening position setting
is set to [Front Left] or [Front Right].
[BASS Boost]
[0] to [+6]
Adjust the bass boost level.
[Rear Speaker Output]
[Rear] [Subwoofer]
Select the rear speaker output.
NOTE
This function is available when the source is off.
[Loudness]
[Off] [Low] [Mid] [High]
Compensates for deficiencies in the low-frequency and
high-frequency ranges at low volume.
Adjusting the HPF or LPF cutoff frequency value
Menu Item Description
Loading ...
Loading ...
Loading ...