Loading ...
Loading ...
Loading ...
UF0915, 1415, 2020 and UN0815, 1215, 1520 User Manual
October 2019
Page 17
Cleaning the Condenser
1. Remove the front panel.
2. Push and hold the OFF button until the machine
stops and / or the Status light is not glowing.
3. Vacuum the surface of the condenser ns,
carefully brush o any loose dirt. If grease is
embedded use coil cleaner to wash it out.
4. Push and release the On button.
5. Return the front panel to its original position.
Other maintenance
Clean the optical sensors.
1. Mix solution of 4 ounces of Clear 1 Ice Machine
Scale Remover and 1.5qt/1.4L of 90
0
F/32
0
C to
110
0
F/43
0
C water.
2. Remove sensors from inner cover by removing
the white c-clip .
3. Use cotton swab and cleaning solution to
thoroughly clean photo sensors.
4. Rinse sensors with clean water.
5. Reinstall sensors in inner panel.
Condenser Surface
Power Status Water De-scale
Sani�ze
On Off
Moving parts hazard.
Risk of personal injury.
Disconnect electrical
power or shut unit OFF
before proceeding.
Loading ...
Loading ...
Loading ...