Loading ...
Loading ...
Loading ...
UF0915, 1415, 2020 and UN0815, 1215, 1520 User Manual
October 2019
Page 12
Connect the Power
This is a cord-connected unit, and must be connected
to its own dedicated power supply. Check the
dataplate on the back of the machine to conrm the
voltage and per the dataplate use fuses or HACR
circuit breakers.
Power Cord:
This 115 volt model is equipped with a cord and 5-15P
plug.
Follow All Local Codes
- This Unit Must Be
Grounded. Do not use
extension cords and do not
disable or by-pass ground
prong on electrical plug.
Plug the power cord into the proper power supply.
Note: Electrical outlets can become worn and the
power supply can then be erratic. Have it replaced if
the connection is loose.
After utility connections
1. Level the cabinet, use the leg levelers on the end
of the legs to adjust to cabinet height. Legs should
have been installed when the unit was unpacked.
2. Wash the bin and door. If desired, the interior of
the bin could be sanitized.
3. Locate the scoop, wash it and have it available for
use when needed.
Installation check list
• Has the machine been installed indoors in an
environment suitable for it?
• Have all of the shipping items and packaging
been removed?
• Has the plastic covering the exterior panels been
removed?
• Has the water supply been connected and
conrmed to not leak?
• Has a properly sized and sloped drain tube been
attached?
• Has the correct voltage power supply been
connected?
Loading ...
Loading ...
Loading ...