Loading ...
Loading ...
Loading ...
TROUBLE SHOOTING
Symptom
Cause and Check
Solution
E00
Safety Key not in position
Re-locate the safety key into the front of the console
E01
Communication error (controller
not receives console signal)
A: Check speed signal wire if connected properly
B: Replace the speed signal wire
C: Replace the driver
E02
Stalling protection
A: Re-insert the motor wire or replace motor
B: Replace driver
C: Stop use and ask electrician for trouble shooting
E03
No speed sensor signal
A: Re-insert the speed signal wire or replace sensor
B: Replace driver
E05
Over current protection
A: System protection and re-start the system
B: Adjust transmission part or add lubrication oil
C: Replace motor
D: Replace driver
E10
Motor peak
Adjust the torsion potentiometer to an appropriate
position
E13
Communication error (console not
receives controller signal)
A: Replace console
B: Replace driver
17
Loading ...
Loading ...
Loading ...