Gaggenau BMP251710 - 24" 200 Series Glass Front Metallic Speed Microwave Oven

User Manual - Page 11

For BMP251710. Also, The document are for others Gaggenau models: BMP 250, BMP 251 710

PDF File Manual, 36 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
11
Preparing Kitchen Units en-us
Install Appliance
Note: The appliance is heavy. It is advisable to install it
with a second person.
NOTICE
Before installing the appliance, be sure to verify the
cabinet dimensions and electrical connections.
Electrical Installation
9 WARNING
The electrical connection of the appliance must be
carried out by a qualified electrician in accordance
with local and regional safety codes.
9 WARNING
This product will only operate when L1 and L2 are
powered up simultaneously. If this does not occur,
then an E300 error will be displayed. This
appliance should be installed with a branch circuit
breaker to allow L1 and L2 to be powered up
simultaneously.
Install a suitable conduit box (not included). The conduit
connector must be used to correctly attach the conduit to
the junction box.
All 4 wires must be connected, regardless if a 3 or 4 wire
connection is used.
9 WARNING
If local codes permit grounding through the electrical
supply neutral, connect both the white neutral wire and
the green ground wire from the oven to the neutral
electrical supply wire.
The four-wire connection is preferred, but where local
codes permit, the three wire connection is also
acceptable.
Model Connection Circuit
Requirements
BMP 250 710
BMP 251 710
4 wire conduit
cable
208 V,
60 Hz
or
240 V,
60 Hz
20 Amps
20 Amps
Local codes may vary; installation, electrical
connections and grounding must comply with all
applicable local codes.
9 AVERTISSEMENT
Le raccordement électrique de l'appareil doit être
effectué par un électricien qualifié conformément
aux codes de sécurité locaux et régionaux.
9 AVERTISSEMENT
Ce produit fonctionnera seulement lorsque L1 et
L2 sont alimentés en même temps. Si ce n'est pas
le cas, le code d'erreur E300 sera affiché. Cet
appareil devrait être installé avec un disjoncteur
de branchement pour permettre à L1 et L2 d'être
alimentés simultanément.
9 AVERTISSEMENT
Les codes locaux peuvent varier; l'installation, les
branchements électriques et la mise à la terre
doivent se conformer à tous les codes locaux
applicables.
Loading ...
Loading ...
Loading ...