Loading ...
Loading ...
Fading hair guard
Attach the fading hair guards to the extra-
wide hair trimmer to trim the hair around the
ears with a faded result. The product comes
with 2 guards. Use both guards to trim hair
around both ears. Choose a hair guard
based on the preferred trimming direction
of back to front or front to back. Always
make sure that you hold the side of the
guard with the short teeth closest to your
ear.
Guard inch mm
Fading hair guards
5/32in.-3/8in. 4-9mm
1 Attach the guard to the extra-wide hair
trimmer to trim the hair around the ear.
Then attach the other guard to trim the
hair around the other ear.
2 Place the product on your hair at the
back or front of your ear, depending on
the trimming direction you prefer. Always
make sure that the side of the guard with
the short teeth is closest to your ear.
3 Move the trimmer slowly around the ear,
while holding it steady (Fig. 18). For best
results, move the trimmer against the
direction of hair growth (back to front).
Precision attachments for use on face
Precision trimmer
Use the precision trimmer to create ne
lines and contours around your facial style,
close to the skin (to a length of
1/32in./0.5mm).
1 Hold the precision trimming head
perpendicular to the skin and move the
trimming head upwards or downwards
with gentle pressure (Fig. 19).
Eyebrow guard
Use the full-size hair trimmer with
the eyebrow guard attached for tidying up
eyebrows or trimming sideburns to a length of
1/4in./6mm.
1 Slowly move the trimmer against the hair
growth direction. Press lightly and make
sure that the surface of the comb always
stays in contact with the skin (Fig. 20).
Attachments for use on head
Extra-wide hair trimmer
Use the extra-wide hair trimmer without a
guard to clip the hair on your head very
close to the skin (1/32in./0.5mm) or to
contour the neckline and area around the
ears.
1 To contour the hairline around the ears,
comb the hair ends over the ears.
2 Tilt the product in such a way that only
one edge of the cutter blades touches
the hair ends when you shape the
contours around the ears.
3 To contour the nape of the neck or
sideburns, turn the product and make
downward strokes (Fig. 16).
4 Move the product slowly and smoothly
following the natural hairline.
Hair guards
Attach a hair guard to the extra-wide hair
trimmer to evenly trim the hairs on your
head. The product comes with 4 hair
guards. The hair length settings are
indicated on the guards. The settings
correspond to the remaining hair length
after trimming.
Guard inch mm
Hair guard 5/32in. 4mm
Hair guard 3/8in. 9mm
Hair guard 15/32in. 12mm
Hair guard 21/32in. 16mm
1 Attach a guard to the extra-wide hair
trimmer.
2 Move the trimmer slowly over the crown
from dierent directions to achieve an
even result. Make sure the surface of the
guard always stays in contact with the skin.
- Always move the trimmer against the
direction of hair growth (Fig. 17). Press
lightly.
- Make overlapping passes over the
head to ensure that all hair that should
be cut has been cut.
- Since all hairs do not grow in the same
direction, you may want to try dierent
trimming positions (i.e. upwards,
downwards, or across). Practice is best
for optimum results.
- Always make smooth and gentle
movements and be sure the surface of the
guard always stays in contact with your
skin.
- When too many hairs have accumulated
on the product, blow the hairs out before
use, for best trimming results.
Body guards
Attach a body guard to the full-size hair
trimmer to trim hairs below the neckline.
The product comes with 2 body guards. The
hair length settings are indicated on the
guards. The settings correspond to the
remaining hair length after trimming.
Guard inch mm
Body guard (green) 1/8in. 3mm
Body guard (green) 3/16in. 5mm
1 Attach a body guard to the full-size hair
trimmer.
2 To trim in the most eective way, stretch
the skin with your free hand and move the
guard against the direction of hair growth
(Fig. 15). Make sure the surface of the guard
always stays in contact with the skin.
Body shaver
Attach the body shaver to the product,
to shave hairs below the neckline such as
your armpits and chest.
Only use the body shaver with the skin
protector.
1 Attach the body shaver to the product.
2 Attach the skin protector to the full-size
hair trimmer (Fig. 14).
3 To shave in the most eective way,
stretch the skin with your free hand and
move the shaver against the direction of
hair growth (Fig. 15). Make sure the
surface of the shaver always stays in full
contact with the skin.
1 To trim hair close to the skin, place the
at side of the cutting element against
your skin and make strokes against the
direction of hair growth (Fig. 10).
2 For contouring, hold the cutting element
perpendicular to the skin and move it
upwards or downwards with gentle
pressure (Fig. 11).
Beard guards
Attach a beard guard to the full-size hair
trimmer to trim your beard and moustache
evenly. The product comes with 6 beard
guards. The hair length settings are indicated
on the guards. The settings correspond to
the remaining hair length after trimming.
Guard inch mm
Stubble guard 3/64in. 1mm
Stubble guard 5/64in. 2mm
Beard guard 1/8in. 3mm
Beard guard 3/16in. 5mm
Beard guard 9/32in. 7mm
Adjustable
guard
1/8in.-
9/32in.
3mm-7mm
1 Attach the guard to the full-size hair
trimmer.
2 Adjustable guard: Push the length
selector to the left or right to select the
desired hair length setting (Fig. 12).
3 To trim the most eective way, move the
guard against the direction of hair growth
(Fig. 13). Make sure the surface of the guard
always stays in contact with the skin.
Attachments for use on body
- Use the green body guards to trim
body hair.
- When you trim for the rst time, use the
5mm/3/16in. body guard to familiarize
yourself with the product.
- Body hair can be trimmed wet or dry,
however dry is preferable because wet
hair tends to stick to the body. Also when
trimming sensitive areas, always use a
body guard.
Loading ...
Loading ...