CINEMA SB160 OWNER’S MANUAL

Loading ...

3. To use OPTICAL / HDMI ARC mode

Ensure that the unit is connected to the TV or audio device.

1. Press the button repeatedly on the unit or press the

OPTICAL, HDMI buttons on the remote control to select the

desired mode.

2. Operate your audio device directly for playback features.

3. Press the VOL +/– buttons to adjust the volume to your desired

level.

Tip: While in OPTICAL/HDMI ARC mode, if there’s no sound

outputfromtheunitandthestatusIndicatorashes,youmay

need to activate PCM or Dolby Digital Signal output on your

source device (e.g. TV, DVD or Blu-ray player).

7. Respond to Your TV Remote

Control

Use your own TV remote control to control your soundbar

7a. For other TVs, do IR remote learning

To program the soundbar to respond to your TV remote control,

follow these steps in Standby mode.

1. Press and hold VOL+ and SOURCE button for 5 seconds on

soundbar to enter learning mode.

 •TheOrangeindicatorwillFastash.

ﬂash quickly

>5 s

Learning POWER button

2. Press and hold the POWER button for 5 seconds on the

soundbar.

3. Press the POWER button twice on the TV remote control.

>5 s

SOURCE

x 2

TV Remote Control

Follow the same procedure (2-3) for VOL- and VOL+. For mute,

press bloth VOL+ and VOL- button on soundbar and press MUTE

button on TV remote control.

ﬂash slowly

>5 s

4. Press and hold VOL+ and SOURCE button for 5 seconds on

soundbar again and now your soundbar respond to your TV

remote control.

• TheOrangeindicatorwillashslowly.

8. SOUND SETTING

This section helps you choose the ideal sound for your video or

music.

Before you start

• Make the necessary connections described in the user manual.

• On the soundbar, switch to corresponding source for other

devices.

Adjust the volume

• Press VOL+/- button to increase or decrease a volume level.

• To mute sound, press MUTE button.

• To restore the sound, press MUTE button again or press VOL+/-

button.

Note: While adjusting the volume, the status LED indicator will

ashquickly.Whenthevolumehashitmaximum/minimumvalue

level,thestatusLEDindicatorwillashesonce.

Select Equalizer (EQ) Effect

Selectpredenedsoundmodestosuityourvideoormusic.

Press the (EQ) button on the unit or press the MOVIE / MUSIC

/ NEWS button on remote control to select your desired preset

equalizer effects:

• MOVIE: recommended for viewing movies

• MUSIC: recommended for listening to music

• NEWS: recommended for listening to news

9. SYSTEM

1. Auto standby

This soundbar automatically switches to standby after 10

minutes of button inactivity and no audio/video play from a

connected device.

2. Auto wake up

The soundbar is powered on whenever a sound signal is

received. This is most useful when connecting to the TV using

the optical cable, as most HDMI™ ARC connections enable

this feature by default.

Loading ...

OWNER’S MANUAL - Page 8