Loading ...
Loading ...
Loading ...
subzero.com | 7
ICE CONTAINER
BI-36F and over-and-under models: To remove, pull the
container forward until it stops, then lift out.
Side-by-side models: To remove, pull the container forward
until it stops, then lift to clear the carrier assembly along the
back. Pull forward and out. Refer to the illustration below.
Dispenser models: To remove, pull the container out par-
tially, then rotate and pull out. Refer to the illustration below.
STORAGE
Freezer Storage
FREEZER BASKETS
BI-36F and side-by-side models: To remove, pull forward
until the basket stops. Pull the two metal clips located
behind the bottom two corners of the basket forward, then
lift up and out. Refer to the illustration below. To reinstall,
push the drawer slides in. Align the basket with the slides
and push back until it stops. Press down on the front of the
basket to engage the slides.
IMPORTANT NOTE: For models BI-36S, BI-42S, BI-42SID,
and BI-42SD, to remove, the freezer basket must be raised
and pulled through the opening in the door liner after
disengaging.
Over-and-under models: To remove the upper and lower
freezer baskets, lift up and out. Refer to the illustration
below. To reinstall, insert the lower basket into the four
corner retainers. Position the upper basket onto the side
rails and slide back until it clicks.
BI-36F and side-by-side models
Over-and-under models
Side-by-side models
Dispenser models
Loading ...
Loading ...
Loading ...