Loading ...
Loading ...
Loading ...
Cleaning the Dishwasher
Clean the exterior of dishwasher with a soft, damp cloth and mild
detergent. If your dishwasher has a stainless steel exterior, affresh
®
Stainless Steel Cleaner - Part Number W10355016 is recommended.
Removal of Hard Water/Filming: It is recommended to use a monthly
maintenance product such as affresh
®
Dishwasher Cleaner Part
Number W10282479.
■ Load your dishwasher (preferably with dishes affected by hard
water/filming).
■ Place tablet in main wash compartment of detergent dispenser.
■ Select cycle/option best for heavily soiled dishes and start
dishwasher.
NOTE: It is recommended to use a detergent tablet or pack for regular
daily use.
If you have a drain air gap, check
and clean it if the dishwasher isn't
draining well.
To Reduce Risk of Property
Damage During Vacation or
Extended Time Without Use
■ When you will not be using the
dishwasher during the summer
months, turn off the water and
power supply to the dishwasher.
■ Make sure the water supply lines are protected against freezing
conditions. Ice formations in the supply lines can increase water
pressure and cause damage to your dishwasher or home. Damage
from freezing is not covered by the warranty.
■ When storing your dishwasher in the winter, avoid water damage by
having your dishwasher winterized by authorized service
personnel.
First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, refer to the
warranty page in this manual and scan the code with your mobile device, or visit https:/www.jennair.com/product_help.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.:
Jenn-Air Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
In Canada:
Jenn-Air Brand Home Appliances
Customer eXperience Center
200—6750 Century Avenue
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
Please keep these User Instructions and model number information for future reference.
To turn the
audible tones
on or off.
Press and hold HI-TEMP WASH for 3 seconds to turn the audible tones on or off. Only
audible tones for confirming button presses can be turned on/off. Important audible tones,
such as indicating a cycle has been interrupted, cannot be deactivated.
OR
To follow the
progress of the
dishwasher
cycle.
Clean indicator glows when a cycle is finished.
If you selected the Sani Rinse option, the Sanitized indicator glows when the cycle is
finished. If your dishwasher did not properly sanitize your dishes, the indicator flashes at the
end of the cycle. This can happen if the cycle is interrupted, or the water could not be heated
to the required temperature.
If Add Dish is glowing, you may add a dish even though the cycle has started. After adding a
dish, press START/RESUME before closing the door.
For Water Softener models, the Add Salt indicator will glow when it is time to add salt to the
Salt Container. Refer to the Water Softener System User Instructions for instructions for
filling the salt container.
The Clean and Sanitized indicators turn off when you open and close the door, or press
CANCEL.
Control Purpose Comments
Dishwasher Care
Problem Solver
If you
experience
Recommended Solutions
Dishes do not dry
completely
NOTE: Plastic and items with nonstick surfaces are difficult to dry because they have a porous surface which tends to
collect water droplets. Towel drying may be necessary.
Use of rinse aid along with the Precision Dry
®
or Precision Dry
®
+ option is needed for proper drying.
Proper loading of items can affect drying.
For improved results, place items on the more slanted side of the rack.
■ Glasses and cups with concave bottoms hold water. This water may spill onto other items when unloading.
■ Unload the bottom rack first.
The Clean light is
flashing
Check the following:
■ Is the overfill protection float able to move up and down freely? Press down to release.
■ Be sure the water supply is turned on to the dishwasher. (This is very important following the new installation of your
dishwasher.)
■ Check for suds in the dishwasher. For more information on suds, see “Dishwasher does not clean completely.”
Loading ...
Loading ...
Loading ...