Loading ...
Loading ...
Loading ...
Raises the temperature with the power of
steam before final rinse to help enhance
shine, finish and reduce glass spots.
Sensor Wash
Cookware/
Bakeware
Normal
Tableware
Raises main wash
temperature from
105°F to 140°F (41°C
to 60°C), steam clean
before rinsing, final
rinse temperature
140°F to 155°F (60°C
to 68°C).
78 100 0 - 3.9
(0 - 14.9)
For added convenience, use for washing a
small load of dishes in the top rack to help
keep the kitchen continuously clean.
Available
with any
cycle
Slightly faster wash for
smaller loads
-7 -30 0
Sanitizes dishes and glassware in
accordance with NSF International NSF/
ANSI Standard 184 for Residential
Dishwashers. Certified residential
dishwashers are not intended for licensed
food establishments. Only sanitizing cycles
have been designed to meet the
requirements of the NSF/ANSI 184
performance standard for soil removal and
for sanitization efficacy. There is no
intention, either directly or indirectly, that all
cycles on a NSF/ANSI 184 certified
dishwasher meet the NSF/ANSI 184
performance standard for soil removal and
for sanitization efficacy.The Sani indicator
glows at the end of the cycle if the Sani
Rinse option was successfully completed. If
the indicator does not activate, it is probably
due to the cycle being interrupted.
Sensor Wash
Cookware/
Bakeware
Normal
Tableware
Top Rack
Wash
Raises main wash
temperature from
105°F to 140°F (41°C
to 60°C) and the final
rinse from 140°F to
155°F (60°C to 68°C).
53 73 0 - 3.0
(0 - 11.2)
Dries dishes with heat. This option with the
use of rinse aid will provide the best drying
performance. Plastic items are less likely to
deform when loaded in the top rack. Turn
Precision Dry
®
off for an air dry.
Available
with any
cycle except
Refresh/
Rinse
Activates the heating
element at the end of
the wash cycle to
speed drying times.
The option defaults to
ON when any cycle is
selected except for
1Hour Wash.
44 52 0
Runs the dishwasher at a later time or
during off-peak electrical hours. Select a
wash cycle and options. Press 4 Hour Delay.
Press START/RESUME. Close the door
firmly. NOTE: Anytime the door is opened
(such as, to add a dish), the START/
RESUME button must be pressed again to
resume the delay countdown.
Available
with any
cycle
Delays the start of a
cycle up to 4 hours
.
240 240 0
Avoids unintended use of the dishwasher between cycles, or cycle and option changes during a cycle.
To turn on Lock, press and hold CONTROL LOCK for 3 seconds. The Control Lock light will stay on for a short time, indicating
that it is activated, and all buttons are disabled. If you press any button while your dishwasher is locked, the light flashes 3
times. The dishwasher door can still be opened/closed while the controls are locked.
To turn off Lock, press and hold CONTROL LOCK or 3 seconds. The light turns off.
OPTIONS CAN BE
SELECTED
WITH
WHAT IT DOES ADDED TIME TO CYCLE ADDED
WATER
GALLONS
(LITERS)
TYPICAL MAX
+
Control Purpose Comments
To start or
resume a wash
cycle.
If the door is opened during a cycle or power is interrupted, the Start/Resume indicator
flashes. Press START/RESUME and push the door firmly closed within 3 seconds.
NOTE: If the door is not closed within 3 seconds, the Start/Resume indicator will flash, an
audible tone will be heard, and the cycle will not start.
To reset any
cycle or options
during
selection.
To cancel a
wash cycle
after it has
started.
Press CANCEL/DRAIN to reset any control selections made.
See “Canceling a Cycle After Dishwasher Is Started” and “Changing a Cycle After
Dishwasher Is Started” sections in the full online User Guide.
Loading ...
Loading ...
Loading ...