Loading ...
Loading ...
Loading ...
www.BISSELL.com
8
4 5
Maintaining the Brush Roll
Turn the foot over and
find the brush roll cover
tab. Use a coin to remove
the Brush Roll, turning
counter-clockwise to
unlock.
Make sure the vacuum is
OFF. Press the vacuum
foot release button to
disconnect it from the
vacuum.
Grasp the Brush Roll and remove from
the foot window area. Clean off hair or
debris from brush.
Remove hair wrap
from Brush Roll,
Brush Roll cap and
end of Brush Roll.
Slide the tab down to un-lock and lift
the corner cover piece.
7
If the Brush Roll stops
spinning due to debris,
the LED light will turn
solid red.
NOTE: Make sure the Brush Roll cover tab is locked into place to prevent damage to the
brush.
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing
maintenance or troubleshooting.
Once Brush Roll is clean of debris and
wrapped hair, place back into the foot and
use coin to turn lock clockwise to lock into
position. Turn vacuum ON to reset.
6
1 2
3
Loading ...
Loading ...
Loading ...