Barazza LAB90 90cm Lab Built-In Multiprogram Oven

User Manual - Page 17

For LAB90.

PDF File Manual, 28 pages, Read Online | Download pdf file

LAB90 photo
Loading ...
Loading ...
Loading ...
17
Impostare l’ora
Dopo l’allacciamento alla rete elettrica, in caso di black
out o di cambio dell’ora è necessario impostare l’ora
esatta premendo il tasto (4) e successivamente i tasti
“+” o “-”
(fig. 12).
A
U
T
O
P
A
U
O
P
A
U
T
O
P
12
Cominciare a cucinare
Impostare il programmatore scegliendo la modalità di
cottura MANUALE, MANUALE CON IMPOSTAZIONE SEMIAU-
TOMATICA o MANUALE CON IMPOSTAZIONE AUTOMATICA.
Attenzione!
Per annullare un errore di programma-
zione premere il tasto (4) e ricominciare.
Se si utilizzano le modalità di cottura MANUALE
o MANUALE CON IMPOSTAZIONE SEMIAUTOMATICA, è
consigliabile infornare le pietanze quando il forno ha
raggiunto la temperatura impostata (la spia termo-
stato (4) deve essere spenta) scegliendo con attenzio-
ne il livello al quale posizionarle (fig. 8 pag. 14).
MANUALE
(accensione e spegnimento manuale)
L’accensione e lo spegnimento del forno sono manuali
e si ottengono semplicemente agendo sulle manopole
che impostano la temperatura e tipo di cottura.
Se si desidera, in questa modalità è inoltre possibile uti-
lizzare il programmatore come semplice contaminuti;
al termine del tempo impostato un suono avviserà che
la cottura è terminata e l’utente deciderà se proseguirla
o interromperla.
A) Cottura manuale senza contaminuti:
Per far funzionare il forno, è sufficiente impostare
tramite le manopole (1) e (2) la temperatura e il tipo
di cottura desiderate senza bisogno di utilizzare il
programmatore.
Il forno partirà immediatamente e resterà acceso
fino a che le manopole saranno riportate manual-
mente sullo zero.
Setting the time
After connecting to the mains, in the case of a black out
or a time change the exact time must be set by pressing
BOEUIFOUIFiwPSiwCVUUPOT (fig. 12).
A
U
T
O
P
A
O
P
A
U
T
O
P
13
Starting to cook
Set the programmer by selecting a cooking mode: MA-
NUAL, MANUAL WITH SEMIAUTOMATIC SETTINGS or
MANUAL WITH AUTOMATIC SETTINGS
Caution! If you make a mistake, press button (4) and
start again.
If you are using the MANUAL or MANUAL WITH
SEMIAUTOMATIC SETTINGS cooking mode, it is recom-
mended that you place the food in the oven
once it has
reached the set temperature
(the thermostat control
light (4) must turn off) choosing the level on which you
position it carefully (fig. 8 page14).
MANUAL
(the oven is turned on and off manually)
The oven is turned on and off manually and this is done
by turning the knobs that set the temperature and the
cooking type.
If you want, the programmer can be used in this mode
as a simple timer; at the end of the set time, a bell will
indicate that the cooking is complete and the user can
decide to continue or stop it.
A) Manual cooking without a timer:
To operate the oven, use knobs (1) and (2) to set the
desired temperature and cooking type without using
the programmer.
The oven will start immediately and will remain on
until the knobs are turned manually to zero.
Loading ...
Loading ...
Loading ...