Loading ...
Loading ...
Loading ...
103
Troubleshooting
The image is too dark. • You are shooting a subject with a light source
behind the subject.
• The brightness of the LCD screen is too low.
p Select the metering mode (page 57).
p Adjust the exposure (pages 54, 55, 114 and 116).
p Adjust the brightness of the LCD backlight (pages 47 and 118).
The image is too bright. • You are shooting a spot lighted subject in a dark
location such as on a stage.
• The brightness of the LCD screen is too high.
p Adjust the exposure (pages 54, 55, 114 and 116).
p Adjust the brightness of the LCD backlight (pages 47 and 118).
The image is
monochrome (black and
white).
• [PFX] (P.Effect) is set to [B&W]. p Set it to the other modes than [B&W] (page 62).
Vertical streaks appear
when you are shooting a
very bright subject.
• The smear phenomenon is occurring. p This is not a malfunction.
When looking at the LCD
screen in a dark place,
some noise may show up
on the LCD screen.
• The camera temporarily brightens the LCD
screen to allow you to check the image being
displayed while you are using the camera in a
dark place.
p This will have no effect on the image you shoot.
You cannot shoot images. • No “Memory Stick” is inserted.
• The capacity of the “Memory Stick” is full.
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
• You cannot shoot while the flash is charging.
• When you shoot a still image, the mode dial is
not set to , P, M or SCN.
• The mode dial is not set to
when you want to
shoot a movie.
p Insert a “Memory Stick” (page 19).
p Delete the images saved in the “Memory Stick” (page 42).
p Change the “Memory Stick.”
p Set it to the recording position (page 120).
—
p Set the mode dial to , P, M or SCN (page 23).
p Set the mode dial to (page 80).
Recording takes a long
time.
• NR slow shutter function is activated. p See page 37.
Symptom Cause Solution
Loading ...
Loading ...
Loading ...