Loading ...
Loading ...
Loading ...
6
Door Removal
In case your home access door is too
narrow for the refrigerator to pass through,
remove the refrigerator doors and drawers.
If you do not need to remove the appliance
doors, proceed to ‘Installing Water Lines’
on page 8.If you need to remove the doors,
continue below.
Tools you will need (Not provided):
Allen Wrench (4mm)
Wrench(8mm)
Philips Screwdriver
Disassembling the fridge door
Some models may be slightly different
from pictures. If some parts shown in the
picture cannot be found in your appliance,
please ignore the relevant description.
1. With the door closed, remove the 3
screws holding the top cover (A) with
Philips (+) screwdriver, and then remove
the top cover with the entire-harness
attached.
2. Take out connectors and the water
coupler from the installation clip. Remove
the two wire connectors (press the top of
the connector (B) and separate it from the
other one) on the left side door .To remove
the water coupler from the hinge, twist and
pull the clips from the coupler then remove
the water line (C) while pressing the
movable part (D) of the water line coupler.
3. Remove the 3 screws (B) fixed on the
Loading ...
Loading ...
Loading ...