Loading ...
Loading ...
Loading ...
12
You can change the following basic settings:
Care and cleaning
In this section, you will find information on
■ the care and cleaning of your appliance
■ Descaling
: Risk of short circuit!
Do not use high-pressure cleaners or steam jet cleaners to
clean your appliance.
Caution!
Risk of surface damage: Do not use
■ harsh or abrasive cleaning agents
■ oven cleaners
■ corrosive or aggressive cleaners, or those containing
chlorine
■ cleaning agents with a high alcohol content
If such an agent comes into contact with the front of the
appliance, wash it off immediately with water.
Caution!
Risk of surface damage: If descaler comes into contact with the
front of the appliance or any other sensitive surfaces, wash it off
immediately with water.
Remove food residues from the cooking compartment as soon
as the appliance has cooled.
Salts are very corrosive and can cause rust. Remove remains
of acidic sauces (ketchup, mustard) or salted food from the
cooking compartment immediately after cooling.
Do not use hard scouring pads or cleaning sponges.
cleaning agents
Basic setting Function Possible settings
™‹ „
Display brightness
™‹ ‚ = dark
™‹ ƒ = medium
™‹ „ = bright
™‚ ƒ
Signal duration:
Sets the length of the audible signal at the end of an opera-
tion
™‚ ‚ = short (10 seconds)
™‚ ƒ = medium (2 minutes)
™‚ „ = long (5 minutes)
™ƒ ‚
Display the clock when the appliance is off
™ƒ ‹ = off
™ƒ ‚ = on
™„ ‚
Continues operation after the door is closed. The operation
does not go back to the beginning when the appliance door
is opened
™„ ‹ = off
™„ ‚ = on
™… ƒ
Time until changes are automatically saved
™… ‚ = short (2 seconds)
™… ƒ = medium (5 seconds)
™… „ = long (10 seconds)
™† ƒ
Sets the water hardness range for the descaling indicator
™† ‹ = softened
™† ‚ = soft (I)
™† ƒ = medium (II)
™† „ = hard (III)
™† … = very hard (IV)
™‡ ‹
Steam cooking heat signal
™‡ ‹ = off
™‡ ‚ = on
™ˆ ‹
Restore the appliance to the factory settings:
■ All changes to the basic settings are cleared
■ Automatic calibration is carried out again
™ˆ ‹ = do not restore
™ˆ ‚= restore
Appliance exterior (with aluminium front) Use soapy water and dry with a soft cloth.
Mild window cleaning agent - wipe over the aluminium front horizontally and without
applying pressure using a soft window cloth or a lint-free microfibre cloth.
Appliance exterior (with stainless steel
front)
Use soapy water and dry with a soft cloth.
Always remove flecks of limescale, grease, starch and albumin (e.g. egg white) imme-
diately. Special stainless steel cleaning agents can be obtained from the after-sales
service or from specialist retailers.
Cooking compartment interior with evapo-
rator dish
Hot, soapy water or a vinegar solution use the enclosed cleaning sponge or a soft
washing-up brush.
Caution!
The cooking compartment could rust.: Do not use steel pads or scourers.
Water tank Soapy water - do not clean in the dishwasher.
Loading ...
Loading ...
Loading ...