MAVIC 2 ENTERPRISE User Manual

Loading ...

Mavic 2 Enterprise Series User Manual

8. Make sure that the accessories are correctly and securely mounted on the aircraft before using it.

9. Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI

certied manufacturers may cause system malfunctions and compromise safety.

Starting/Stopping the Motors

Starting the Motors

A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the inner or

outer bottom corners to start the motors. Once the motors have started spinning, release both sticks

simultaneously.

Stopping the Motors

There are two methods to stop the motors:

Method 1: When the aircraft has landed, push and hold the left stick down. The motors stop after three

seconds.

Method 2: When the aircraft has landed, conduct the same CSC that was used to start the motors, as

described above. The motors stop immediately. Release both sticks once the motors have

stopped.

Method 1 Method 2

Stopping Motors Mid-Flight

Stopping the motors mid-ight will cause the aircraft to crash. The motors should only be stopped mid-

ight in an emergency situation such as if there is a collision, a motor has stalled, the aircraft is rolling in

the air, or the aircraft is out of control and is ascending/descending very quickly. To stop the motors mid-

ight, use the same CSC that was used to start the motors.

Loading ...

Dji MAVIC 2 ENTERPRISE Camera