Loading ...
Loading ...
Loading ...
4
Before using for the first time
1 Remove the plastic blade covers from the knife
blade. Take care the blades are very sharp.
These covers should be discarded as they are to
protect the blade during manufacture and transit
only.
2 Wash the parts see ‘care and cleaning’.
Key
Processor
1
Pusher
2
Feed tube
3
Lid
4
Bowl
5
Detachable drive shaft
6
Power unit
7
Pulse button
8
Speed 1 button
9
Speed 2 button
bk
OFF button
bl
Cord storage (at back)
bm
Safety interlocks
bn
Plastic Blender (if supplied)
a Blade assembly
b Sealing ring
c Goblet
d Filler cap
e Lid
A Standard Attachments
b
Knife blade
b
Dough tool
b
Emulsifying tool
b
4mm slicing/grating disc
b
2mm slicing/grating disc
bt
Extra fine grating disc
ck
Mini chopper/mill (if supplied)
cl
Citrus juicer (if supplied)
B Optional Attachments (FP3235SI only)
cm
Juice extractor
To Use Your Food Processor
Illustrations
1
3
1 Fit the detachable drive shaft onto the power unit.
2 Then fit the bowl to the power unit and turn
clockwise until it locks into position.
3 Fit an attachment over the bowl drive shaft.
l
Always fit the bowl and attachment onto the
processor before adding ingredients.
4 Fit the lid - ensuring the top of the drive shaft/tool
locates into the centre of the lid.
5 Plug in, switch on and select a speed. (Refer to
the recommended usage chart).
l
The processor will not operate if the bowl or lid
are not fitted correctly into the interlock. Check
that the feed tube and bowl handle are situated
to the right hand side.
l
Use the pulse (P) for short bursts. The pulse
will operate for as long as the button is held in
position.
6 Reverse the above procedure to remove the lid,
attachments and bowl.
Important
l
Your processor is not suitable for crushing or
grinding coffee beans, or converting granulated
sugar to caster sugar.
l
When adding almond essence or flavouring to
mixtures avoid contact with the plastic as this may
result in permanent marking.
Using The Attachments
Refer to recommended usage chart for
each attachment.
1 2 3 4 5 6 7 8 9 10
11 12
13
14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
Plastic Blender
To Use Your Blender
Illustrations
4
6
1 Fit the sealing ring into the blade
assembly - ensuring the seal is located correctly in
the grooved area.
l
Leaking will occur if the seal is damaged or
incorrectly fitted.
2 Hold the underside of the blade assembly and
insert the blades into the goblet - turn anti-
clockwise until it is secure. Refer to the graphics
on the underside of the blade assembly as follows:
- Unlocked position
- Locked position
Before plugging in
l
Make sure your electricity supply is the same as the one shown on the underside of your appliance.
Important - Plug and Fuse Information
l
The wires in the cord are coloured as follows:
Blue = Neutral, Brown = Live.
l
If the plug supplied with your appliance has a fuse fitted it is rated 10A or 13A. If the fuse fails it must be replaced
with one of the same rating.
l
If the plug or cord requires replacing a new cord set should be fitted by an Authorised Braun Repairer.
Note:
l
For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then
the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and
a replacement may be obtained from your Braun Authorised Repairer (see Service).
l
If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if
an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.
l
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into contact
with food.
5722000073 Iss 1 Braun Metal FP301BI.Eng_Ara B5.indd 45722000073 Iss 1 Braun Metal FP301BI.Eng_Ara B5.indd 4 06/02/2020 08:2406/02/2020 08:24
Loading ...
Loading ...
Loading ...