Loading ...
Loading ...
Loading ...
OPERATION NOTES
This equipment should be placed on flat surface. The incline or decline of surface should
be limited to 3% or less for best performance and safety.
Cable Tension Adjustment
Adjust the tension of the Cable System by adjusting the length of Short Chain
(#63) which is connected by C-clip (#61) to Sliding Weight Post Cable (#102).
If the tension is too loose, move C-clip (#61) up to shorten the length of Chain.
If the tension is too tight, move C-clip (#61) down to extend the length of
Chain.
Bench Backrest Adjustment Angles
Backrest adjustment angle ranges from -13
0
to 81
0
.
©IMPEX INC.
23
www.marcypro.com
Loading ...
Loading ...
Loading ...