Moffat MTE18GTKWW Owner’s Manual and Installation Instructions

Loading ...

Installation Instructions

REVERSING THE DOOR SWING (CONT.)

REHANG THE REFRIGERATOR DOOR

1. Lower the refrigerator door onto the bottom

hinge pin.

2. While holding the door securely, use the new

left-hand middle hinge from the accessory kit

insert hinge pin into socket in door. Attach the

center hinge with two screws with a 5/16″ socket

and ratchet.

REHANG THE FREEZER DOOR

1. Lower the freezer door onto the center hinge pin.

2. Place the left top hinge so the pin fits into the door

socket. (Left top hinge and cover can be found inside

of the product. Call your Moffat Service provider

at 800.561.3344 if parts are missing. Support the

door on the handle side and make sure the door

is straight and the gap between the doors is even

across the front. While holding the door in place,

tighten the top hinge screws. Do not overtighten

these screws. Tighten them until they are just snug,

and then turn them another one-half turn.

3. Snap the left top hinge cover over the hinge.

1” = 2.5 cm; 1’ = 0.3 m

Loading ...

Moffat MTE18GTKWW 18 cu.ft. Top Freezer Refrigerator