Loading ...
Loading ...
Loading ...
Operation
12
Use this button to select the Hot,Warm,Tap Cold or Cold temperature.
C"
Water Supply
" button
D"Adjust" button
To adjust the water level, wash time, rinse times, spin time and delay time
When the corresponding process light flashing, you can adjust the
parameter by pressing the “Adjust’ button.
Water Level: it can be chosen between 1 to 10, the different cycles have
different default water level.
Wash Time: it can be chosen between 0 to 15 mins, the different cycles
have different default wash time. When you do not want to use the wash
process, you can press the "Adjust" button to adjust the wash time to 0.
Rinse Times: it can be chosen between 0 to 3 times, the different cycles
have different default rinse times. When you do not want to use the
rinse process, you can press the "Adjust" button to adjust the rinse times
to 0.
Spin time: it can be chosen between 4 mins to 9 mins, the different
cycles have different default spin time. When you do not want to use the
spin process, you can press the "Adjust" button to adjust the spin time to
0.
Delay: it can be chosen between 1 hours to 48 hours, the default delay
time is 0.
Note:
The energy test program of “RTL 861SU-19” and “RTL 8751SU-19” was performed
using the“Normal” cycle setting of:
Water Temp: Tap Cold; Water level: 10; Wash Time: 12; Rinse: 1 Rinse; Spin: 9 mins.
If the default setting is same to the energy test, you have to choose the process
again, or it will run fuzzy procedures.
If you choose energy test program, it is suggested to put the washing powder into the
bottom of the inner tub.
Adjust
ﻝﻳﺩﻌﺗ
Water Supply
ءﺎﻣﻟﺍ ﺩﻭﺯﻣ
Loading ...
Loading ...
Loading ...