Loading ...
Loading ...
Loading ...
Hint
The procedure explained above is for guidance only. For details, refer to the operating instructions supplied with the computer.
You can perform pairing or connect to another BLUETOOTH device even when a BLUETOOTH connection is established. In this case, the
previous connection will be disconnected.
SongPal has no function of play music via BLUETOOTH connection. Play music with your BLUETOOTH devices such as smartphones,
computers, etc.
If your computer does not have the BLUETOOTH function, it will be necessary to connect a commercially available BLUETOOTH adaptor to the
computer.
Note
The pairing mode of the speaker is released after about 5 minutes and the (BLUETOOTH) indicator flashes slowly. However, when pairing
information is not stored in the speaker, such as at the factory settings, the pairing mode is not released. If the pairing mode is released before
finishing the process, repeat from step
.
Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
The speaker is already paired with 8 devices and another device is to be paired.
The speaker can be paired with up to 8 devices. If a new device is paired after 8 devices have already been paired, the paired device with the
oldest connection time is replaced by the new one.
The pairing information with the speaker has been deleted from the BLUETOOTH device.
The speaker is initialized.
All pairing information will be deleted. If you initialize the speaker, it may not be able to connect your iPhone/iPod touch or computer. In this
case, erase the pairing information of the speaker on your iPhone/iPod touch or computer, and then perform the pairing procedure again.
The speaker can be paired with multiple devices, but can only play music from one paired device at a time.
The passkey of the speaker is “0000.” If a passkey besides “0000” is set on the BLUETOOTH device, pairing cannot be done with the speaker.
When an audio cable is connected to the speaker’s AUDIO IN jack while the speaker and the BLUETOOTH device have been connected via
BLUETOOTH connection, sound from the BLUETOOTH-connected device is not output from the speaker (the hands-free function is available). To
listen to music from the BLUETOOTH device, disconnect the audio cable from the speaker’s AUDIO IN jack.
Related Topic
How to make a wireless connection with BLUETOOTH devices
Connecting with a paired computer (Windows 10)
Listening to music of a device via BLUETOOTH connection
Terminating the BLUETOOTH connection (After use)
4-694-127-11(4) Copyright 2017 Sony Corporation
30
Loading ...
Loading ...
Loading ...