Loading ...
Loading ...
Loading ...
14 49-7805-3
Troubleshooting
TROUBLESHOOTING / WIFI SETUP
Normal Operating Sounds
■ You may hear a pinging noise caused by
water being picked up and thrown against the
condenser on rainy days or when the humidity is
high. This design feature helps remove moisture
and improve efficiency.
■ You may hear the thermostat click when the
compressor cycles on and off.
■ Water will collect in the base pan during high
humidity or on rainy days. The water may
overflow and drip from the outdoor side of the
unit.
■ The fan may run even when the compressor
does not.
■ Water droplets being thrown against the outside
coils can make a pinging noise. This helps
cool the condenser. You can reduce this noise
by removing the side-base water hole seal by
removing 2 screws, then hole seal. Removing this
seal will lower the Energy Efficiency of your until.
NOTE: Do not drill hole in the base pan.
WiFi Setup
GE Appliances WiFi Connect (for customers in the United States)
GE Appliances U+ Connect Enabled*
If your Air Conditioner (AC) has a Connected Appliance Information label
located on the outside as shown below, your AC is GE Appliances U+ Connect Enabled. A WiFi communication
card is built into the product allowing it to communicate with your smart phone for remote monitoring, control and
notifications. Please visit GEAppliances.com/connect to learn more about connected appliance features, and to learn
what connected appliance apps will work with your smart phone. For assistance,
call 1-800-220-6899.
Network: GE_MODULE_XXXXNetwork: GE_MODULE_XXXX
PASSWORD: XXXXXXXX
MAC ID: XX-XX-XX-XX-XX-XX
CONTAINS FCCID: ZKJ-WCATB002
CONTAINS IC:
100229A-WCATB002
123-45-678
Loading ...
Loading ...
Loading ...