Loading ...
Loading ...
Loading ...
en Basic operation
36
Depending on the setting of the
time display, the end of the pro-
gramme is shown on the display
either with "Finish in" (e.g.
3h25min) or "Finish at" (e.g.
15:20hours). You can change this
setting in the "Basic settings"
→Page37.
3. To activate timer programming,
press .
Note:To deactivate timer program-
ming, press for approx.
4seconds.
Starting the programme
▶
Press .
a The programme has ended when
the display shows "Finished".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→"Terminate programme",
Page36
¡ The appliance switches off auto-
matically 1minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
Interrupting programme
Note:When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1. Press .
a The programme is saved and the
appliance switches off.
2. Press to resume the pro-
gramme.
Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
▶
Press for approx.
4seconds.
a All displays light up.
a As soon as the displays are off,
the display shows "Programme
was terminated " and then "Fin-
ished".
a The programme is cancelled and
ends after approx. 1minute.
Display programme informa-
tion
You can show information about pro-
grammes and additional functions on
the display.
1. Press .
2. Press the programme button or an
additional function.
Switching off appliance
1. Please note the information on
"Safe use" →Page11.
2. Press .
Tip:If you press during the wash
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
Loading ...
Loading ...
Loading ...