Loading ...
Loading ...
Loading ...
5
OPERATING
INSTRUCTIONS
1. Fill the beverage bottle with chilled
water up to the indicated “WATER
FILL LINE."
2. Insert the carbonator head into the
bottle and screw down firmly until it
is tightly fitted to the bottle (fig. a).
3. Use the toggle to make sure the
safety window is fully open on the
charger chamber.
4. Insert a disposable CO
2
charger into
the open window of the charger
chamber, narrow end facing down
(fig. b), and ensure the charger is
inserted firmly in place by gently
pushing the disposable CO
2
charger
back until you hear a click.
NOTE: Only use Cuisinart
CO2 Chargers powered by
Soda Sparkle.
5. Place the correctly filled beverage
bottle with attached carbonator
head in an upright and stable
position on a clean, flat surface.
Lower the charger chamber down
onto the carbonator head to engage
the activating thread (fig. c). Screw
the charger chamber clockwise onto
the carbonator head. The safety
window will automatically close and
lock prior to piercing the CO
2
charger.
6. Continue to firmly turn the charger
chamber clockwise until you can not
tighten anymore and the CO
2
charger is pierced. You will see the
CO
2
release into the bottle and hear
a hissing sound and small
associated release of excess CO
2
through the carbonator head safety
release valve – a normal part of the
carbonation process.
NOTE: Wait at least 30 seconds
for full carbonation to take place.
7. Slowly unscrew and remove the
charger chamber from the
carbonator head. Slide the safety
window open using the slider button
and eject the used CO
2
charger
through the window by pushing your
index finger through the hole
provided.
8. Shake the bottle thoroughly for
5 seconds (fig. d) to complete the
carbonation process.
9. Slowly unscrew the carbonator head
and remove, then enjoy your
sparkling water.
NOTE: Once opened, use only the
standard bottle cap to reseal the
bottle. The sparkling nozzle cap
should be used only when
carbonating.
If you would like, you can add a
natural flavor stick to your glass of
sparkling water for a refreshing,
flavored soda (fig. e).
NOTE: Never pour in flavor
before carbonating.
10. The supplied bottle cap will maintain
a residual pressure and can be
placed on the bottle to keep the
contents from going flat (fig. f).
For Best Results
• Use only chilled water for carbonation.
• Always fill bottle to maximum fill
fig. e
fig. d
fig. f
fig. a
fig. b
fig. c
Loading ...
Loading ...
Loading ...