Loading ...
2
IMPORTANT
SAFEGUARDS
When using your Compact Sparkling
Beverage Maker – Powered by
SodaSparkle™, basic safety precautions
should always be followed, including the
following:
Use only Cuisinart Single-Use
Recyclable Carbon Dioxide (CO
2
)
Chargers. Other chargers may cause
the machine to malfunction and could
result in injury. Use of CO
2
that does
not meet FDA beverage grade
standards may cause illness.
1. Read instructions thoroughly
before use.
2. Always properly disassemble the unit
when not in use, before putting on or
removing parts and before cleaning.
3. Please supervise closely when in use
near children. Do not let children
operate beverage maker.
4. If the Compact Sparkling Beverage
Maker has any damage or
malfunctions, DO NOT OPERATE.
Contact our Customer Service Center
to return for an examination, repair or
adjustment. Use only Cuisinart
single-use, recyclable 8-gram CO
2
chargers – Powered by
SodaSparkle™.
5. Using accessory attachments not
sold or recommended by Cuisinart
can cause the unit to malfunction or
cause injury.
6. Do not allow the unit or its contents
to come into contact with any hot
surfaces, including stove, or to hang
over table edge or counter. Do not
store in a vehicle.
7. Before operating, always make sure
the Compact Sparkling Beverage
Maker is properly positioned and
securely in place. Use only as
intended while the unit is in operation.
8. After each use, be sure the unit is no
longer under pressure before
disassembling.
9. Do not put finger or other objects into
the Sparkling Beverage Maker while
it is in operation.
10. Do not use the appliance for anything
other than the intended purpose, as
outlined in the instruction booklet.
11. Operate the unit only when the
bottle is filled with chilled water
to the indicated fill line.
12. Do not attempt to carbonate when
bottle is empty.
13. Never overfill the bottle.
14. Do not under any circumstances try
to carbonate hot water, as the bottle
may burst.
15. Do not use excessive force while
handling or operating the unit, as this
can damage components.
16. Any flavors or fruit juice must be
added after carbonation. Remember
to thoroughly clean and rinse the
bottle after use if any flavors, syrups
or juices are added to the bottle after
carbonation.
17. Ensure that the carbonator head is
screwed straight down onto the bottle
to avoid cross-threading. Do not use
the system if the carbonator head is
not screwed down straight on the
bottle.
18. When operating the system, always
ensure the charger chamber is
screwed down straight on the
carbonator head to avoid cross-
threading and do not use the product
if the charger chamber is not straight
on the carbonator head.
19. Ensure that the bottle is on a flat
surface when operating the system.
Do not lean over the bottle while
screwing down the carbonator head.
20. Remove the charger chamber and
carbonator head only after the CO
2
charger has completely finished
discharging. You should wait at least
30 seconds before attempting to
remove.
21. Do not invert the charger chamber
or carbonator head unless fully
Loading ...
Loading ...
Loading ...