Loading ...
Loading ...
Loading ...
22 Part Number 000015236 Rev 00 11/17
Maintenance Section 4
Step 10 Refer to Removal of Parts for Cleaning/Sanitizing
and disassemble parts for hand cleaning/sanitizing.
• Hand clean all parts.
• Rinse all parts with clear potable water.
• Sanitize all parts — do not rinse after sanitizing.
• Spray all interior bin surfaces with sanitizer (do not rinse
sanitized areas).
• Spray evaporator discharge spout.
Step 11 Reassemble ice machine.
Step 12 Turn off the ice making water supply.
Step 13 Refer to chart and premix water and sanitizer.
Amount of Water Amount of Sanitizer
1 Gallon (4 L) Water 0.5 ounce (15 ml)
Step 14 Fill the evaporator and reservoir with sanitizer/
water solution.
Step 15 Move the toggle switch to the ON position. The ice
machine will make ice with the sanitizer/water solution and
deposit the ice in the bin. Add the remaining sanitizer/water
solution when the water level in the reservoir drops.
NOTE: Do not allow the sanitizer/water level to drop below
the minimum water level. The ice machine will discontinue
the cleaning cycle if the water float switch opens.
Step 16 After all of the sanitizer/water solution has been
added to the reservoir, turn on the ice making water supply.
Step 17 Continue the freeze cycle for 30 minutes and then
discard all ice produced.
Procedure to Clean Heavily Scaled Flake Ice
Machines
Step 1 Remove front and top covers and set the toggle
switch to the OFF position.
Step 2 Remove all ice from the bin.
Step 3 Turn off the ice making water supply.
Step 4 Remove the top cover from water reservoir.
Step 5 Refer to chart below:
Premix cleaner with lukewarm water in a non-metallic
container.
Model
Water Reservoir
Capacity
Mix Cleaner and Water
Use Metal Safe Ice Machine
Cleaner, part number 000000084
only
Cleaner Water
UNF0200
UFF0200
UFF0350
UNF0300
14 oz (400 ml) 9 oz (266 ml) 5 oz (148 ml)
RFF0320
RNF0620
RFF0620
17 oz (500 ml) 11 oz (325 ml) 6 oz (177 ml)
RNF1100
RFF1300
34 oz (1 L) 23 oz (680 ml) 11 oz (325 ml)
RFF2500 68 oz (2 L) 46 oz (1.3 L) 22 oz (650 ml)
Step 6 Remove all water from the evaporator and water
reservoir. Add the entire cleaner/water solution and re-install
the reservoir cover.
Leave the cleaner/water solution in the evaporator for a
minimum of 4 hours.
Step 7 Remove all cleaner/water from the evaporator and
water reservoir.
Step 8 Follow the standard cleaning and sanitizing
procedures.
Loading ...
Loading ...
Loading ...