Loading ...
Loading ...
Loading ...
8
Causes of damage
NOTICES
Scratches on glass ceramic surface: Cookware with
rough bottoms will scratch the glass ceramic surface.
Salt, sugar and sand: Salt, sugar or grains of sand will
scratch the glass ceramic surface. Never use the
cooktop as a working surface or for setting things
down.
Overheated cookware: Avoid heating pots or pans
that are empty.
Hot cookware: Never set down hot pans and pots on
the control panel or frame. This may cause damage.
Hard and sharp objects: Hard or sharp objects falling
on the cooktop may damage it.
Boiled-over food: Sugar and products containing
sugar may damage the cooktop. Immediately eliminate
spills of these products with a glass scraper.
Foils and plastics: Aluminum foil and plastic will melt
on the hot cooking zones. Stove protective film isn't
suitable for your cooktop.
Unsuitable cleaning agent: Shimmering metallic
discolorations on the glass ceramic surface result from
the use of inappropriate cleaning agents and abrasion
from cookware.
Protecting the Environment
Energy-saving advice
Always place a fitting lid on cookware. Cooking with
an uncovered pan will increase energy consumption
considerably. Use a glass lid to provide visibility and
avoid having to lift the lid.
Use cookware equipped with a solid, flat bottom.
Curved pan bases increase energy consumption.
The diameter of the pan base must match the size of
the element. If not, energy may be wasted.
Choose cookware of a size suited to the amount of
food you are going to cook. A large pan that is only
half full will use a lot of energy.
Use a small amount of water when cooking. This
saves energy, and vegetables retain a larger
percentage of their vitamins and minerals.
Switch to a lower heat setting in time.
Select a suitable setting for ongoing cooking. You will
waste energy by using an ongoing cooking setting
which is too high.
Use the residual heat of the cooktop. For longer
cooking times, you can switch the element off
5-10 minutes before the end of the cooking time.
Loading ...
Loading ...
Loading ...