Loading ...
Loading ...
Loading ...
18
B O S C H
* Model dependent
You can download this manual from the local homepages of Bosch.
Problem Possible causes Solution
The ironed
garment turns
dark and/or
sticks to the
soleplate.
• The selected temperature is
too high and has damaged
the garment.
• Select a suitable temperature
for the material being ironed
and clean the soleplate with a
damp cloth.
The soleplate
turns brown.
• This is a regular
consequence of continued
use over a long period of
time.
• Clean the soleplate with a
damp cloth.
The appliance
makes a
pumping
sound.
• Water is being pumped into
the steam tank.
• Water tank (1) is not
correctly inserted in the
housing.
• The sound will not stop.
• This is normal.
• Adjust the water tank to t
correctly.
• If the sound will not stop, do
not use the steam generator
and contact an authorised
technical service centre.
Loss of
pressure
during ironing.
Steam release button has
been activated for too long a
period of time, that is, it has
been pressed too frequently.
Use the steam release button
at intervals. This improves the
ironing result as the textiles will
be steamed dried and ironed
properly.
Water spots
appear on the
garment during
ironing.
May be caused by steam
condensed on the ironing
board.
Wipe the textile cover of the
ironing board, and iron any
water drops to dry them.
Water spots
appear on the
garment during
use of the
“PulseSteam”
function.
Water spots are caused by
steam condensation in the
hose when cooling down after
use.
Water drops stop coming out
of the soleplate after using the
“PulseSteam” function for some
time.
The hose gets
hot during use.
This is normal. It is caused by
the steam passing through the
hose during steam ironing.
Place the hose on the opposite
side so that you cannot touch
the hose during ironing.
Water leakage
from the boiler.
Filter (12) located at the side
of the appliance is loose.
Tighten up the lter.
The iron
does not stop
steaming after
placing it on
the pad (2).
“PulseSteam” function has
been activated by double
click.
Just press the trigger once
again and the iron will stop
steaming at once.
If the above does not solve the problem, get in touch with an authorised technical
service.
Loading ...
Loading ...