Loading ...
Loading ...
Loading ...
13
Maintenance & Cleaning & Troubleshooting
Maintenance & Cleaning Troubleshooting
regularly, either by hand (using mild soap and warm water) or in your
clothes washer on a delicate cycle, cool water. Never use fabric
softener or bleach. We recommend letting Pads air dry to maintain
maximum long term effectiveness.
Replacement pads are available at most retail outlets.
SCRUBBING FLOOR PAD
90% Polyester / 10% Polyamide
Machine wash at 40°
Tumble dry low or air dry
No bleach / No fabric softener
CARPET PAD
90% Polyester / 10% Polyamide
Machine wash at 40°
Tumble dry low or air dry
No bleach / No fabric softener
IMPORTANT QUESTION:
Steamer?
A. YES!
Floor Steamer should NEVER be used without either a Hard Surface
Floor Pad or Carpet Glide with Carpet Pad.
Iss u e s Po s s ib le C a u s e s S o lu tio n s
Steam is not coming out of the Improper Handle assembly. Call Customer Service to receive instructions
Steam Nozzles. to correct the problem .
The Scrubbing Floor Pad Not enoug h pressure was Position Steamer about 2” above Pad and
is not adhering to Steamer. applied when attaching Pad. FIRMLY press it down onto the Pad.
Floor Pad requires replacing Replacement Floor Pads can be pu rchased at
due to age of the Floor Pad. most electrical appli ance retail outlets.
The Cleaning Pads a re getting Boiler is
overfilled
. Let Steamer run until excess water ceases.
soaked (too wet). Why? -OR- Remove some water from Boiler onc
e
the Boiler has cooled down completely.
Green “Steam Read y Indicator Wait for green “Steam Ready Indicator Light”
Lig ht” is not illumina ted. to illuminate.
The steam seems to be Front Steam J ets are being Only use Front Steam J ets in short bursts for
making my floor too wet. used too frequently. clea
ning toug her dirt or to clean hard to
reach areas.
The Cleaning Pad is too wet Replace the wet Pad with a dry, clean Pad
(saturated with moisture) and continue cleaning .
Microfiber washing instructions – ULTRA MICROFIBER
Loading ...
Loading ...
Loading ...