Loading ...
Loading ...
Loading ...
3. Thread increment weight guide rods into the bottom plate of the tower frame. Tighten using a crescent wrench.
Item Description Qty.
1 Increment Weight Guide Rod 2
4. Install nuts and washers securing the increment weight guide rods to the top plate of the tower frame using a 7/16" wrench.
Item Description Qty.
1 Nut, ¼" Nylock 2
2 Washer, Flat ¼" ID 2
3 Increment Weight Guide Rod 2
Tighten hardware to 16-20 in-lb (1.8-2.2 Nm).
5. Route cable up through the top of the tower frame and down through the side tube of the frame.
Item Description Qty.
1 Cable 1
Page 15 of 34
Loading ...
Loading ...
Loading ...