Loading ...
Loading ...
Loading ...
23
7.Daisy-chain function
7. Daisy-chain function
Daisy-chain enables multiple monitor
connections
This Philips display is equipped with
DisplayPort 1.2 interface which enables
daisy-chaining to multiple displays.
Now you can daisy chain and use
multiple monitors via a single cable
from one display to the next.
How to daisy chain display
• Connect DisplayPort cable to DP
port from laptop
• To daisy chain to the 2nd display,
connect DisplayPort cable to DP
port from the first display DP out
port
• Repeat above steps, you can daisy
chain multiple displays
• Refer below table for the numbers
of multiple display chaining
DP OUTDP
DP
Note
1. Depending on the capabilities of
your graphic cards, you should be able
to daisy chain multiple displays with
various configurations. Your display
configurations will depend on your
graphic card capabilities. Please check
with your graphic card vendor and
always update your graphic card driver.
2. There are two modes available
when you daisy chaining: “Clone” and
“Extend”, enter the following OSD
manual path for the selection: OSD /
Setup / DP Out Multi-Stream / Clone,
Extend.
3. When you daisy-chaining to multiple
displays, we recommend that you enter
to the OSD manual to set USB to USB 2.0
for optimal resolution, the USB3.2 Gen2
may result in reduced resolution.
Display
Resolution
(standard 60
Hz)
Maximum
number of display
chaining(including
1st motherboard
connection display)
Extend mode (DP1.2)
1920 x 1080
(1080p) or
1920 x 1200
4
Loading ...
Loading ...
Loading ...