Loading ...
Loading ...
Loading ...
Engine Oil u Changing Engine Oil & Filter
79
Maintenance
7.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
8.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
9.
Install the new oil filter and tighten.
10.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
11.
Fill the crankcase with the recommended
oil (
2
P. 63) and install the oil fill cap.
12.
Check the oil level.
2
P. 76
13.
Check that there are no oil leaks.
14.
Install the lower fairing.
Rubber
seal
Oil filter
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m).
Required oil
When changing oil & engine oil
filter:
3.2 US qt (3.0 liters)
When changing oil only:
3.0 US qt (2.8 liters)
Loading ...
Loading ...
Loading ...