Loading ...
Loading ...
Loading ...
Page 7 of 19 | Effective 6/20 | WCAG
INTEGRATED COLUMN
SKSCW181RP
18" INTEGRATED COLUMN
WINE REFRIGERATOR WITHOUT TRIM PIECE
CUTOUT DIMENSIONS – FLUSH INSTALLATION
SINGLE COLUMN
INSTALLATION CLEARANCES – FLUSH INSTALLATION
TOP VIEW
**
Varies depending on the
thickness of the custom
cabinet panel. The door
panels in the optional
Signature Kitchen Suite
stainless steel door panel
kit are 3/4" (19 mm) thick.
Door handle must be
added to this dimension.
*
18" (457 mm)
finished width
4"
(102 mm)
finished
return*
25" (635 mm)
min. depth
84"
(2134 mm)
A minimum 4" (102 mm) finished return that matches the cabinet
exterior is recommended on all sides and the top of the cutout
opening. The shaded area will be visible after installation.
*
1 3/8"
(35 mm)
3/4"
(19 mm)**
90°
115°
19 1/2"
(495 mm)
17 3/4"
(451 mm)
8 3/4"*
(223 mm)
25"
(635 mm)
1/4"
(6 mm)
min.
1/4"
min.
(6 mm)
18" (457 mm)
1 1/4"*
(32 mm)
5"
(127 mm)
electrical
location
Notes
Wine refrigerator can be installed ush with 3/4" custom
panel or optional stainless steel panel kit.
With a 25" (635 mm) cutout depth, the front face of
the wine refrigerator ts ush with 25" (
635 mm) depth
adjacent cabinets.
Electrical
A 115V, 60Hz., 15 amp power supply is required. An
individual properly grounded branch circuit or circuit
breaker is recommended. Install a prop
erly grounded
3-prong electrical receptacle recessed into the back wall.
Electrical must be located on rear wall as shown.
Note: GFI (ground fault interrupter) is not recommended.
Notes
Door Swing Clearances – The installation must allow
for clearances to adjacent walls or cabinets. This wine
refrigerator is equipped with a 2-position door stop. The
factory-set 115° doo
r swing can be adjusted to 90° if
clearance to adjacent cabinets or walls is restricted.
Door Handle Clearances – The Door Handle depth must
be added to the dimension noted to determine the total
clearan
ces required from adjacent cabinets or walls. This
clearance will vary depending on the custom handle used.
When using the Stainless Steel Door Panel Kit w/Handle or
the Brushed Aluminum Hand
le (optional accessories), the
door handle clearance with door open 115° is 11" (279 mm).
TOP VIEW
SKSCW181RP
18" INTEGRATED COLUMN
WINE REFRIGERATOR WITHOUT TRIM PIECE
CUTOUT DIMENSIONS – FLUSH INSTALLATION
SINGLE COLUMN
INSTALLATION CLEARANCES – FLUSH INSTALLATION
TOP VIEW
**
Varies depending on the
thickness of the custom
cabinet panel. The door
panels in the optional
Signature Kitchen Suite
stainless steel door panel
kit are 3/4" (19 mm) thick.
Door handle must be
added to this dimension.
*
18" (457 mm)
finished width
4"
(102 mm)
finished
return*
25"
(635 mm)
min. depth
84"
(2134 mm)
A minimum 4" (102 mm) finished return that matches the cabinet
exterior is recommended on all sides and the top of the cutout
opening. The shaded area will be visible after installation.
*
1 3/8"
(35 mm)
3/4"
(19 mm)**
90°
115°
19 1/2"
(495 mm)
17 3/4"
(451 mm)
8 3/4"*
(223 mm)
25"
(635 mm)
1/4"
(6 mm)
min.
1/4"
min.
(6 mm)
18" (457 mm)
1 1/4"*
(32 mm)
5"
(127 mm)
electrical
location
18-INCH INTEGRATED COLUMN WINE
REFRIGERATOR CUTOUT DIMENSIONS –
FLUSH INSTALLATION SINGLE COLUMN
A minimum 4" (102 mm) finished return that matches the cabinet * exterior is
recommended on all sides and the top of the cutout opening. The shaded area will
be visible after installation.
Notes
Wine refrigerator can be installed flush with 3/4" custom panel or
optional stainless steel panel kit.
With a 25" (635 mm) cutout depth, the front face of the wine
refrigerator fits flush with 25" (635 mm) depth adjacent cabinets.
Electrical
A 115V, 60Hz., 15 amp power supply is required. An
individual properly grounded branch circuit or circuit breaker
is recommended. Install a properly grounded 3-prong
electrical receptacle recessed into the back wall. Electrical
must be located on rear wall as shown.
Note: GFI (ground fault interrupter) is not recommended.
18-INCH INTEGRATED COLUMN WINE
REFRIGERATOR INSTALLATION CLEARANCES –
FLUSH INSTALLATION TOP VIEW
* Door handle must be added to
this dimension.
** Varies depending on the thickness
of the custom cabinet panel. The door
panels in the optional Signature
Kitchen Suite stainless steel door
panel kit are 3/4" (19 mm) thick.
Door Swing Clearances – The installation must allow for
clearances to adjacent walls or cabinets. This wine
refrigerator is equipped with a 2-position door stop. The
factory-set 115° door swing can be adjusted to 90° if
clearance to adjacent cabinets or walls is restricted.
Door Handle Clearances – The Door Handle depth must be added to the
dimension noted to determine the total clearances required from adjacent
cabinets or walls. This clearance will vary depending on the custom
handle used. When using the Stainless Steel Door Panel Kit w/Handle or
the Brushed Aluminum Handle (optional accessories), the door handle
clearance with door open 115° is 11" (279 mm).
Loading ...
Loading ...
Loading ...