Loading ...
Loading ...
Loading ...
Page 16 of 19 | Effective 6/20 | WCAG
CUTOUT DIMENSIONS – RETROFIT INSTALLATION
18" FREEZER
AND
24" REFRIGERATOR COLUMN
24" (610 mm)
min. depth
84"
(2134 mm)
4"
(102 mm)
finished
return*
A minimum 4" (102 mm) finished return that matches the cabinet exterior is
recommended on all sides and the top of the cutout opening. The shaded
area will be visible after installation.
An optional Frame Kit can be used to provide a finished look to unfinished
cabinet returns.
*
41 1/2"
(1054 mm)
finished width
1 3/8" (35 mm)
CUTOUT DIMENSIONS – RETROFIT INSTALLATION
18" FREEZER
AND
30" REFRIGERATOR COLUMN
24" (610 mm)
min. depth
84"
(2134 mm)
4"
(102 mm)
finished
return*
A minimum 4"
(102 mm) finished return that matches the cabinet exterior is recommended on
all sides and the top of the cutout opening. The shaded area will be visible after installation.
An optional Frame Kit can be used to provide a finished look to unfinished cabinet returns.
*
47 1/2"
(1207 mm)
finished width
1 3/8"
(35 mm)
2 3/4"
(70 mm)
2 3/4"
(70 mm)
5"
(127 mm)
electrical
location
4"
(102 mm)
water location
4" (102 mm)
water location
5"
(127 mm)
electrical
location
CUTOUT DIMENSIONS – RETROFIT INSTALLATION
18" FREEZER
AND
24" REFRIGERATOR COLUMN
24" (610 mm)
min. depth
84"
(2134 mm)
4"
(102 mm)
finished
return*
A minimum 4"
(102 mm) finished return that matches the cabinet exterior is
recommended on all sides and the top of the cutout opening. The shaded
area will be visible after installation.
An optional Frame Kit can be used to provide a finished look to unfinished
cabinet returns.
*
41 1/2"
(1054 mm)
finished width
1 3/8"
(35 mm)
CUTOUT DIMENSIONS – RETROFIT INSTALLATION
18" FREEZER
AND
30" REFRIGERATOR COLUMN
24" (610 mm)
min. depth
84"
(2134 mm)
4"
(102 mm)
finished
return*
A minimum 4" (102 mm) finished return that matches the cabinet exterior is recommended on
all sides and the top of the cutout opening. The shaded area will be visible after installation.
An optional Frame Kit can be used to provide a finished look to unfinished cabinet returns.
*
47 1/2"
(1207 mm)
finished width
1 3/8"
(35 mm)
2 3/4"
(70 mm)
2 3/4"
(70 mm)
5"
(127 mm)
electrical
location
4"
(102 mm)
water location
4" (102 mm)
water location
5"
(127 mm)
electrical
location
COLUMN
COLUMN
Notes
The 18" integrated column freezer
has an actual width of 17 1/2" (445
mm) to accommodate a retrot
installation. This will allow you to
co
mbine the 18" freezer column
with a 24" refrigerator column in a
41 1/2" (1054 mm) cutout or with a
30" refrigerator column in a 47 1/2"
(1207 mm) cutout.
Electrical
A minimum 15 amp (115V, 60Hz)
power supply is requ
ired for each
individual column. An individual
properly grounded branch circuit
or circuit breaker is recommended.
Install a properly grounded 3-prong
electrical receptacle rec
essed into
the back wall. Electrical must be
located on rear wall as shown.
Note: GFI (ground fault interrupter)
is not recommended.
Water Line
A cold water supply is required for
water dispenser and auto
matic
icemaker operation for each
individual column. Water pressure
must be between 20 and 120 p.s.i.
Tubing should be long enough to
extend to the front of the unit. Allow
enough tubing to accom
modate
a bend leading into the water line
connection.
Water line can enter an opening
through oor or back wall.
Install a shut-o valve between the
icemaker water valve and cold water
supply in the ho
me.
INTEGRATED COLUMN
CUTOUT DIMENSIONS – RETROFIT INSTALLATION
The 18" integrated column freezer
has an actual width of 17 1/2" (445
mm) to accommodate a retrofit
installation. This will allow you to
combine the 18" freezer column
with a 24" refrigerator column in a
41 1/2" (1054 mm) cutout or with a
30" refrigerator column in a 47 1/2"
(1207 mm) cutout.
A minimum 15 amp (115V, 60Hz)
power supply is required for each
individual column. An individual
properly grounded branch circuit or
circuit breaker is recommended.
Install a properly grounded 3-prong
electrical receptacle recessed into
the back wall. Electrical must be
located on rear wall as shown.
Note: GFI (ground fault interrupter) is not
recommended.
A cold water supply is required for water
dispenser and automatic icemaker
operation for each individual column.
Water pressure must be between 20 and
120 p.s.i.
Tubing should be long enough to
extend to the front of the unit. Allow
enough tubing to accommodate a
bend leading into the water line
connection.
Water line can enter an opening through
floor or back wall.
Install a shut-off valve between the
icemaker water valve and cold water
supply in the home.
Loading ...
Loading ...
Loading ...