Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
Problem Possible causes Remedy
Motor does not start Safety lock button not fully depressed
Battery not installed properly
Battery is low in charge
Battery is either defective or will not
take a charge.
Overheat protection activated
Check that safety lock button on switch box is fully
depressed before pulling the switch control bail wire.
Check battery installation.
Charge the battery.
Replace the battery.
1. Working depth too large, set to a shorter depth.
2. Tines blocked, remove the blockage.
3. Soil too hard, select correct work depth and
move forward and backward several times while
slowing down the operation speed.
4. Wait until the motor cools down for about 15
minutes before further use.
Abnormal noises Tines are jammed
Lubrication running out
Bolts, nuts or other components are
loose.
Switch off. Wait till tines come to a complete stop
and remove battery. Remove jammed material.
Tiller/cultivator must be repaired. Call our customer
service help line at 1-800-313-5111 for assistance.
Tighten all components. Arrange for repair if noises
continue.
Abnormal vibrations Tines damaged or worn
Working depth too large
Replace damaged or worn tines.
Adjust working depth.
Poor results Working depth too small
Worn tines
Read instructions on page 9 and 10 on how to ma-
neuver cultivator/tiller to get the desired results.
Replace damaged or worn tines.
CALL US FIRST !!
Call us first with questions about operating or maintaining this product at 1.800.313.5111
between 7:30 a.m. – 4:30 p.m. Eastern Standard Time, or send emails to ea[email protected].
13
SERVICE
Now that you have purchased your Tiller/Cultivator, should a need ever exist for repair parts or
service, simply contact us at 1-800-313-5111. Be sure to provide all pertinent facts when you call
or visit.
REPAIR PARTS
Please record your serial number in the space provided below.
• NAME OF ITEM Tiller/Cultivator
• MODEL NUMBER TC70040
• SERIAL NUMBER
Loading ...
Loading ...
Loading ...