Loading ...
Loading ...
Loading ...
30
315 MHz 24Vdc RADIO RECEIVER PROGRAMMING
Programming Radio Receiver:
1. Press and release the “Learn” button on the
receiver. The learn indicator light will glow steadily
for 30 seconds.
2. Within 30 seconds, press and hold the button on the hand-held remote. The
operator will now operate when the push button on the remote control is pressed.
Repeat Steps 1 and 2 for each remote control that will be used.
Erase ALL Remote Control Codes:
Press and hold the “Learn ” button on the receiver panel until the indicator light turns
off (about 6 seconds). All previous codes are now erased. Reprogram each remote you
wish to use.
IMPORTANT: Hand-held remote NOT included.
NOTE: Disconnect the second receiver
when using a master/second setup.
NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this receiver
and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE
NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Learn
Button
Optional 315 MHz Hand Held Remotes - See Accessories
Loading ...
Loading ...
Loading ...