Loading ...
Loading ...
Loading ...
18
FINISHING THE INSTALLATION
TO FINISH THE INSTALLATION:
Once the Ventilation Hood has bee mounted in
place it will be necessary to install the electrical
service. All electrical work should be done by a
qualified electrician and must conform to all local
standards. Refer to the wiring diagrams on Pages
17 & 18, for proper hook-up and grounding.
NOTE: Black = live, White = neutral, Green = ground
Complete installation by making ductwork connections,
testing unit functions, and installing & finishing drywall.
CARE AND USE:
CONTROLS – We recommend you turn your hood on before you begin cooking to establish fresh air flow. After you’ve
finished cooking, let the blower run for a few minutes to clear the air and help keep the kitchen fresh and clean.
BLOWER – The speed control knob turns the blower ON/OFF and adjusts blower speed. To adjust speed turn the
speed knob clockwise to decrease and counterclockwise to increase the blower speed.
HOOD LIGHTING – A single switch controls both lights. Use only 50W maximum Halogen Narrow Flood replacement
bulbs.
CAUTION: Halogen lamps are constructed of a glass bulb with a pressurized internal filament tube that operates at high
temperatures and could unexpectedly shatter. Should the outer bulb break, particles of extremely hot glass could be
discharged into the fixture enclosure and/or surrounding environment, thereby creating a risk of personal injury or fire.
When replacing the bulb, let the bulb cool, and assure that power to the light has been turned off. Never allow hot bulb
to come into contact with water.
Do not touch the hood light bulbs when in use. They may be hot enough to cause injury.
WARMING LAMPS – Each warming lamp is controlled by it’s own ON/OFF switch. Use only R40 size, 250W maximum
infrared bulbs.
FILTERS – Filters should be cleaned frequently in a detergent solution and are dishwasher safe. Empty grease
collection tray/s regularly. Remove filter/s by gently pulling up and out. Grease collection tray/s are beneath each filter/s.
UNPLUG THE BLOWER MOTOR BEFORE CLEANING VENTILATOR –
Remove filter to access blower motor plug. Vacuum blower to clean. Do not immerse in water.
Do not allow an excessive accumulation of grease, use a mild detergent when cleaning.
Do not use harsh abrasives, steel wool pads, or abrasive cloths.
Loading ...
Loading ...
Loading ...