Loading ...
Loading ...
Loading ...
Manual Cleaning
You can direct Coredy D400 to clean a particular area by using the
directional buttons on the remote control.
6.
Use the Boundary Strip (Sold Separately)
With the Boundary Strip, you can keep Coredy D400 away from any
area or item you do not want Coredy D400 to clean. Coredy D400
will recognize the Boundary Strip and will not cross into the
blocked-off area.
3. Apply adhesive tape to lay the Boundary Strip flat on the floor.
Make sure the strip is placed FLAT on the floor.
1. Identify the area or item you do not want Coredy D400 to get
close to.
2. If necessary, use scissors to cut the Boundary Strip to a shorter
length. Be sure to correctly measure the length before cutting.
7.
21
MAX
Move forward
Move backward
Turn left Turn right
Note: If the Boundary Strip is rolled up, remove and then
re-apply on the floor with adhesive tape. Otherwise the
Boundary Strip may not work well.
Make sure the Boundary Strip is placed on the same
surface plane Coredy D400 is used on.
Be careful not to damage the floor when using adhesive
tape. It is not recommended for use on carpets.
Keep the Boundary Strip away from objects that emit
excessive heat.
Loading ...
Loading ...
Loading ...