Loading ...
Loading ...
Loading ...
If the Charging Dock is inaccessible, Robot will not be
able to recharge, please place the robot manually on
Charging Dock for charging. (Refer Activate the Robot)
Start Cleaning Cycle
Press the AUTO button once to wake up the robot.
Press the AUTO button again to start a cleaning cycle
(or button on Remote Control).
If its battery gets low before finishing a cleaning cycle,
robot returns to the Charging Dock to recharge.
6.
Activate the Robot
Place Coredy D400 onto the Charging Dock, making
sure the metal charging contacts on the Charging Dock
match up with those underneath the robot.
If successful, you will hear a series of tones. Once the
AUTO Power button illuminates, Coredy D400 is ready
for use.
5.
11
Initial Use, Switch on the Power Button on the Bottom.
Note:
Please refer to section 3.3 for more Cleaning Mode.
Note:
MAX
AUTO
Loading ...
Loading ...
Loading ...