Loading ...
Loading ...
Loading ...
Operating the appliance en
23
Interior fittings
(not all models)
Shelf
~ Fig. #
You can vary the shelf:
■ Pull out and remove the shelf.
Vario shelf
~ Fig. $
You can store tall items (e.g. cans or
bottles):
■ Take out the front part of the shelf
and push under the rear part.
Extendable shelf
~ Fig. %
You can give yourself a better overview:
■ Pull out a shelf.
You can completely remove the shelf:
1. Press and hold down both buttons
under the shelf.
2. Pull out the shelf, lower and swing
out to the side.
Container
~ Fig. &
You can remove the container:
■ Lift the container at rear and remove.
You can insert the container:
■ Place the container on the telescopic
rails and push into the appliance.
Storage compartment
~ Fig. '
You can remove the storage
compartment:
■ Lift up storage compartment and
remove.
Bottle holder
~ Fig. (
When you open and close the door:
■ The bottle holder prevents the
bottles from overturning.
1 Operating the
appliance
Operating the appliance
Switching on the appliance
1. Press the % button.
The appliance begins to cool.
2. Set the required temperature.
~ "Setting the temperature"
on page 24
Operating tips
■ After the appliance has been
switched on, it may take several
hours until the set temperature has
been reached. Do not put in any
food until the selected temperature
has been reached.
■ The sides of the housing are partly
heated slightly. This prevents
condensation in the area of the door
seal.
@ Refrigerator compartment
temperature display
Indicates the set temperature
in °C.
H Button alarm
Switches the warning signal off.
Loading ...
Loading ...
Loading ...