Loading ...
Loading ...
Loading ...
9
INSTALLATION INSTRUCTIONS
5. Align the grille to engage the screw heads
through the keyhole slots in the outer
flanges of the sleeve. Push downward
until the screws are positioned into the
bottom of the keyhole slots. Tighten all 4
screws. Unwind and discard the wire
loop.
6. Unpack the air conditioner according to
the carton instructions.
7. Slide the air conditioner fully into the sleeve.
Center the air conditioner in the sleeve so that
all seals bear evenly to prevent leakage.
Note: AIr conditiner is 3 inches deeper than
sleeve and will stick out 3 inches in front of
sleeve.
8. Put together trim frame by laying the 4 frame
pieces face down on a flat surface and
snapping then securely together.
9. Install the insulating foam in the recess of the
trim frame. Install the 1/4" insulating foam
around the inside circumference of the trim
frame. Begin in the bottom left corner and run
foam around the entire circumference of the
trim frame. Make sure to keep foam flush with
the bottom edge of the trim frame.
10. Slide the trim frame onto the air conditioner
until the foam makes a seal with the wall
sleeve.
11. Before inserting the plug into the grounded
outlet, make sure the Fan Control is OFF.
Excessive Weight Hazard
Use two or more people to move and
install air conditioner.
Failure to do so can result in back or
other injury.
WARNING
trim frame
1/4" insulating foam
trim frame
insulating foam
trim frame
cabinet
Loading ...
Loading ...
Loading ...