Loading ...
Loading ...
Loading ...
7
English
CONTROL PANEL AND REMOTE
PA RT S A N D F E AT U R E S
2
1 3 4
5
8
6
7
1
2
3
4
5
6
7
POWER ON/OFF
Turns the air conditioner on and off. When turning on,
a rising tone will sound to confirm. When turning off,
a descending tone will sound.
AUTO CLEAN
• The AUTO CLEAN function is used to remove
moisture from the heat exchangers and helps
prevent odor from forming. This function can be
activated from the control panel only.
• When FL appears on the display, press AUTO
CLEAN button, it will drain out the water collected
in internal tank through upper drain port.
FAN SPEED
Adjusts the circulation fan speed between low (F1),
medium (F2), and high (F3).
MODE
Switches the air conditioner between COOL, FAN,
and DRY modes. The respective indicator in the
display will light to show the active mode.
DIGITAL DISPLAY AND INDICATORS
Digital display shows the set temperature in degrees
Fahrenheit, fan speed, or the selected TIMER delay.
Indicators will light to show active mode and
additional settings. The WATER FULL indicator will
light to indicate when the internal water drain tank
needs to be emptied.
TEMP/TIMER
▲
/
▼
Use these buttons to adjust the set temperature up or
down, or to adjust the timer delay time.
TIMER 1–24 Hr
Allows you to set a delay from 1 to 24 hours that will
turn the air conditioner on or off automatically.
Power
Temp
Fan Speed
Timer Mode
Energy
Saver
Auto
Swing
1
6
3
4
9
7
8
Operation of functions is the same when using the remote or the
control panel, unless otherwise stated.
For detailed instructions on each function, see the following pages.
8
9
ENERGY SAVER
Activates the ENERGY SAVER mode. In this mode,
the fans will only run when the compressor is running.
AUTO SWING
Sets the motorized air discharge to oscillate,
improving air circulation in the room. This function
can only be activated from the remote control.
Loading ...
Loading ...
Loading ...