Loading ...
Loading ...
Loading ...
Rinnai 10 Dry-Soft® RD-400/600AU Operation Manual
TROUBLE SHOOTING
ERROR CODES
Rinnai Dry-Soft gas clothes dryers have a self diagnostic function. If a fault occurs, a 2 digit code will
flash on the Digital Display on the control panel. This assists with diagnosing the fault and may
enable a problem to be solved without the need for attendance by service personnel. Please quote
the code displayed when arranging a service call.
SERVICE
Rinnai recommend that this appliance be serviced every 2 years.
Any service or repair work should only be carried out by an authorised person. Rinnai Australia has a
service and spare part network in all States. Rinnai service personnel are fully trained and equipped
to provide the best service for Rinnai appliances. If your appliance needs servicing, ring the Helpline
contact numbers on the back of this manual.
Code(s) Displayed Possible Cause Remedy
05, 32, 90 Filter Blockage(s) Check and clean lint filter, back filter and air inlet filter.
11 Ignition Failure
Check the gas supply is turned 'on'.
Turn appliance 'off' then 'on' again.
Arrange for service if the above does not remedy the
fault.
12 Flame Failure
Check the gas supply is turned on fully.
Check and clean lint filter, back filter and air inlet filter
Arrange for service if the above does not remedy the
fault.
Other - Arrange for service.
Service calls for general cleaning, maintenance and wear and tear are not
necessarily covered under the warranty. Service calls of this nature may be
chargeable.
If the power supply cord or any other component of the dryer are damaged, they
must be replaced by Rinnai or an Authorised person.
Service and repair work must be carried out by an Authorised person.
15
NOTE
Loading ...
Loading ...
Loading ...