Loading ...
Loading ...
Loading ...
o IMPORTANT: There are ventilation
holes around the outside of the hob.
YOU MUST ensure that these holes are
not blocked by the work top, when you
put the hob into position (see drawing
opposite).
o Carefully turn the hob upside down and
place it on a cushioned mat.
o Apply the sealing strip provided around
the edge of the appliance.
o The protective covering must be
removed from both sides.
o Do not leave a gap in the sealing agent
or overlap the thickness.
o IMPORTANT: Do not use a silicon sealant to seal the appliance
against the aperture. This will make it difficult to remove the hob
from the aperture in future, particularly if it needs to be
serviced.
o The supplied brackets need to be fitted to the fixing points on
the underside of the hob.
o Place a bracket onto each fixing, ensuring that the outer hole
lines up with the hole on the hob.
25
Loading ...
Loading ...
Loading ...