Loading ...
Loading ...
Loading ...
PITCH CONTROL:
To adjust the pitch, or the speed of play-
back, adjust the pitch control slider either
up (slower) or down (faster) depending on
your requirements.
On the side of the plaer there are 4 rows
of silver dots marked called strobe dots. For
50Hz power systems as used in Australia &
New Zealand, only the top 2 rows of strobe
dots need to be observed. These dots rep-
resent the following:
• Top row (small dots): 33⅓ RPM.
• Second row (large dots): 45 RPM.
Operaon Cont’d
TARGET LIGHT:
The Target Light can be used to assist in cueing up the stylus more accurately in a dark environment.
To acvate the Target Light, press the small buon to the right hand side of the Target Light and the
Target Light will pop up and illuminate.
To deacvate the Target Light, push the Target Light back down into the base of the unit. The target light
will click into place once fully depressed.
PRODUCT MAINTENANCE:
Clean the stylus before and aer each use, or as required during use with a so brush specically de-
signed for the purpose to prevent the accumulaon of dust.
When sound becomes distorted or noisy, check the condion of the stylus. If the stylus is worn out or
damaged, replace it with a new one.
From me to me, the dust cover and turntable cabinet should be wiped down with a so, dry cloth.
Utmost care needs to be taken not to scratch the delicate gloss nish of the acrylic dust cover.
Volale materials should not be used, such as solvents, alcohol, paint thinners, etc. They may remove the
paint or damage the luster.
While illuminated by the red light from beneath the power dial and with the plaer spinning, observe
the strobe dots on the edge of the plaer. If the appropriate row of strobe dots appears to be staonary,
the plaer is moving at the precise rated speed. If the dots appear to be moving to the right, the plaer
is moving below the rated speed and the Pitch Control slider should be moved down unl the dots are
staonary. If the dots appear to be moving to the le, the plaer is moving above the rated speed and
the Pitch Control slider should be moved up unl the dots are staonary.
12
Loading ...
Loading ...
Loading ...