Loading ...
Loading ...
Loading ...
4
ASSEMBLY
Thank You
Thank you for purchasing this product. It was carefully engineered to provide excellent performance
when properly operated and maintained.
Please read this entire manual prior to operating the equipment. It instructs you how to safely and
easily set up, operate and maintain your machine. Please be sure that you, and any other persons who
will operate the machine, carefully follow the recommended safety practices at all times. Failure to do
so could result in personal injury or property damage.
All information in this manual is relative to the most recent product information available at the time
of printing. Review this manual frequently to familiarize yourself with the machine, its features and
operation. Please be aware that this Operator’s Manual may cover a range of product specifications for
various models. Characteristics and features discussed and/or illustrated in this manual may not be
applicable to all models. We reserve the right to change product specifications, designs and equipment
without notice and without incurring obligation.
If applicable, the power testing information used to establish the power rating of the engine equipped
on this machine can be found at www.opei.org or the engine manufacturer’s web site.
If you have any problems or questions concerning the machine, phone your local authorized dealer or
contact us directly. Customer Support telephone numbers, website address and mailing address can be
found on the separate supplement sheet packed with this machine. We want to ensure your complete
satisfaction at all times.
Throughout this manual, all references to right and left side of the machine are observed from the
operating position, unless otherwise noted.
Contents of Carton
• Jet Sweep Blower
• Carriage Screw (2)
• Jet Sweep Blower Operator’s Manual
• Safety Glasses
• Star Knob (2)
• Oil (1 bottle)
• 90° Discharge Chute Attachment
• Engine Operator’s Manual
• Product Registration Sheet
• Upper Handle
NOTE: All references to the left or right side of the jet sweep blower are from the operator’s position.
Any exceptions will be noted.
Assembly
Attaching the Upper Handle
1. Remove the carriage screws (a) and star
knobs (b) from the carton. See Figure 1.
2. Place the upper handle
over the lower handle,
aligning the upper
holes/metal tabs in the
upper handle with the
upper holes/lower holes
in the lower handle.
Secure the upper handle
to the lower handle with
the carriage screws (a)
and star knobs (b). See
Figure 2.
Set-Up
90° Discharge Chute Attachment
To redirect airflow at a 90° angle during operation, a chute attachment is included
for optional use. See Attaching & Removing the Chute Attachment in the Operation
section.
Adding Oil
Refer to the Engine Operator’s Manual for information on adding and checking oil.
CAUTION
Always check the engine oil before each use as instructed in the Engine
Operator’s Manual. Add oil as necessary. Failure to do so may result in
serious damage to your engine.
Adding Fuel
Refer to the Engine Operator’s Manual for information on adding fuel.
WARNING
Use extreme care when handling gasoline. Gasoline is extremely
flammable and the vapors are explosive. Never fuel the machine indoors or
while the engine is hot or running. Extinguish cigarettes, cigars, pipes and
other sources of ignition.
b
a
Figure 1
672 series shown
Figure 2
Loading ...
Loading ...
Loading ...