DTI36M977BB/DA User Manual

Loading ...

English18

Installation instructions

3-Wire Cable from Power Supply to 3-Wire Cable from Cooktop

IMPORTANT: Where local codes permit, 3-wire cable can be use to supply power. In those

cases connect connect cooktop ground wire to the neutral wire from the junction box.

A. 3-wire cable from power supply

B. L1 wires

C. Ground (G) or bare ground wire (from

cooktop)

D. 3-wire cable from cooktop

E. Junction box

F. N (normally White) wire (from power

supply)

G. UL listed wire connector

H. L2 (normally Red) wires

I. UL listed or CSA approved conduit

connector

1. Disconnect power.

2. Remove Junction box cover, if present.

3. Connect the flexible cable condult

from the cooktop to the junction box

using a UL listed or CSA approved

condult connector.

4. Tighten screws on condult connector,

if present.

5. Connect the two L2 wires together

using the UL listed wire connectors.

6. Connect the two L1 wires together

using the UL listed wire connectors.

7. Connect the Ground (G) or bare ground

wire from the cooktop cable to the

Ground (G) or bare ground wire (in the

junction box) using a UL listed wire

connectors.

8. Install junction box cover.

9. Reconnect power.

NZ9500K_MOD_DTI30M977B_DG68-00898A-00_EN+MES+CFR.indb 18 2017-04-05  3:02:29

Loading ...

Dacor DTI36M977BB/DA Contemporary 36" Black Glass Induction Cooktop